P99
The
P99 is designed for greater heights, wich require a faster operation
speed with a high safety factor. The winch has a disc brake a swell
as a self blocking gearbox, wich means that in the event of a brake
problem, the winch will not move.
In the event of electricity loss,
a manual handle can be applied to the winch motor and it can be driven
manually. Due to the self blocking gearbox, the manual operation
is very slow.
EG Type approved (CE)
Type |
P99 Snail
gearbox selfblocking |
Power |
4 kW/3phase/480V |
Motor
rotations/min |
1500 |
Lifting capacity |
250 kg |
Holding capacity |
1000 kg |
Speed |
3450
m |
Running time / 10 min. |
60% |
Brake |
Disc
brake |
Cable |
10
mm (4500 kp min break force) |
Weather protection |
IP54 outdoor use |
Operation panel |
Non permanent Up/Down/Emergency Stop |
Cable
capacity 5. winding |
55 m |
Motor
turning wheel |
slow
lifting & controlled manual descend |
Mounting space |
338 mm
x 485 mm |
Width / length incl. motor |
524
x 338 x 353 mm height |
Fallstop
For
some safety standards it may be required to install a completely
independent back up system, that can catch the jumpers weight, if
the winch broke mechanically. This safety back up can be performed
by the Fallstop. While lowering the jumper on the bungee cord, the
retractable cable is connected permanently to the end of the bungee
cord.
Back
Up Device |
complete
back up for the entire winch |
Cable
length |
40m
retractable cable |
Fallen
energy reduction |
6
kN |
MONTIC
Mittelweg 31 C - D-20148 Hamburg - Germany
E-Mail: contact@montic.de - www.montic.de |