Index News & Links The Company Rides & Products The Scad Dive
Equipment & Supplies Event Rentals Show & Performance Email us Switch to english pages



Highlights of the AIRGLIDER

Capacity from 90 to 1100 per hour +++ New ride experience - slow motion +++ interactive 2 seater +++
Small space requirement +++ Adaptable to existing structures +++ Up to 6 riders per line +++ Option to start at bottom


Airglider
The innovative modular zip ride system


It can carry up to 6 riders per cable line. Its operates with a self retracting air brake system and is designed to provide a paraglide feeling. In contrary to fast thrill rides, this ride offers a slow motion at great height. Exiting, enjoyable and addictive. In be attached to any structure and the ride may start at the bottom.

Technical Data Airglider

Capacity/h:
90 - 1100
Height :
100 - 160 ft / 30 - 50 m
Operational staff:
2
Length:
220 - 350 ft / 70 - 110 m

Highlights of the SCAD business

dry and wet versions +++ impressive attraction for any park or site +++ efficient fail safe operational system +++ high hourly capacity and revenue up to $ 1600 +++ unforgetable ride experience for as low $ 20 +++ small foot print +++ German safety standard and TÜV/ASTM approval +++ great sponsorship opportunity +++ Quick return of investment during one season



SXT10/SXT20
Small mobile 40' or 70' tower


The SXT 10 system is a very flexible real free fall tower, which requires very little space and its set up within a few hours. It consists of a 16 x 16 ft (5 x 5 m) SCAD net structure and a small tower equipped with a staircase.
It can also be set up without a tower to release riders into free fall from any other 40 - 70 ft structure or building. It is the perfect solution to enhance business of old ride towers.

Technical Data SXT10

Capacity/h: 
60
Height: 
40 ft / 12 m
Operational staff: 
2
Footprint: 
16x21ft /5x7m
SXT40
Scad system for existing towers


This set up is based on an existing towers, from which riders can be launched into free fall.

The SCAD landing device is suspended from four small tower structures (16,5 m / 55 ft), leaving free airspace between the net and the release point. System includes winch system and small towers.

Technische Daten SXT40

Capacity/h:
80
Height :
any tower height
Operational staff:
2
Footprint:
43x43ft/13x13m
SD40
SCAD System Mobile Unit
This system is completely dismantable and fits into a minivan. It is especially designed for mobile operations and is installed on mobile cranes. It can also be attached to any existing tower, building or other structures.

Technical Data SD40

Capacity/h:
35
Height:
141ft/43m
Set up/down:
1h
Operational staff:
3
Footprint:
50x50ft/16x16m
SMT40
SCAD Mobile Tower
This mobile tower is equipped with a centrally lifted cabin. Up to 4 riders enter the cabin on the ground to be lifted into release position.
It is transported on a 40ft truck w/ small trailer and requires a mobile crane and forklift for set up. It is designed for use at fairs and seasonal seaside operations, that donīt allow fixed installations.

Technische Daten SMT40

Capacity/h:
60-80
Height:
141ft/43m
Set up/down:
16h
Operational staff:
3
Footprint:
60x60ft/20x20m
SDT40
SCAD Tower
This is the light version of the SCAD tower, which operates a central rider cabin in combination with the SCAD landing device.

Technische Daten SDT40


Capacity/h:
40
Height:
165ft/55m
Operational staff:
2
Footprint:
50x50ft/16x16m

SPT40
Sky Park Tower
This tower is designed as multi-use structure, that has the stability to accomodate not only the SCAD Dive, but other rides like slides, rotors and swings, as well as a panoramic platform. It operates the SCAD independently inside and is accessed by an external lift cabin.

Technische Daten SPT40

Capacity/h:
80
Capacity panoramic platform:
25
Operational staff:
2
Footprint:
50x50ft /16x16m
SMS
SCAD MEGA SPLASH
By installing a shallow pool underneath the net, any SCAD system can be converted into a wet ride.
After the net has soaked up water in the pool and has been lifted back into position, 30 ft off the ground, it produces a mega size splash upon landing, which is thrilling and refreshing at the same time.

Technische Daten SMS

Capacity/h:
n.a.
Height:
n.a.
Set up/down:
0,5h
Operational staff:
n.a.
Footprint:
36x36ft/12x12m
SXT40
Scad system for existing towers
This set up is based on an existing towers, from which riders can be launched into free fall. The SCAD landing device is suspended from four small tower structures (16,5 m / 55 ft), leaving free airspace between the net and the release point. System includes winch system and small towers.

Technical Data SXT40
Capacity/h:
80
Height:
any tower height
Operational staff:
2
Footprint:
43x43ft/13x13m
Attendents and harnessing

The SCAD Dive requires only 2 staff for its operation.
The ground controller instructs the riders how to put on the easy to handle one-size harnesses.
The special CFF (controlled free fall) harness is designed as a 2 in 1 system, wich has an additional integrated safety harness and guarantees the correct body position under any circumstances.
The 2nd operator works at the top of the tower and connects the rider to the release mechanism.
Upon a count down he pulls the release and the rider starts a 100 ft free fall.
Back on the ground the rider simply walks out of the landing net.
In standing position the harness can be removed quickly by opening two buckles.
Alternative towers
MONTIC also offers alternative tower models for any purpose. Pipe structures are cost efficient and have great load capacities for extensive attachments, such as bungee ramps, swing platforms etc.

Our internal CAD supported design department is ready to convert your wishes into reality. Our product range includes all from custom made winch systems to elevators and safety systems.
The ride

The feeling of a SCAD dive is extraordinary and unusual. It is the only thrill ride, that combines thrill with a maximum of comfort.

There are no distracting elements or uncomfortable impacts.
 Safety

MONTIC SCAD systems are built according to German safety standards and have been tested and approved by the TÜV Germany. They also comply with US ASTM standards.

It has also been inspected by the HSE-UK, DTI-Denmark, TÜV-Austria, SA-Sweden, Lift Institute - Netherlands etc. and operates in 18 countries around the world including the USA and Japan.

contact@montic.de